Electrical pumping stations Impulse

Usage of breaker boom systems at reception bunkers of crushing machines, tracked mobile crushing and screening machines simplifies production process, decreases down time of the equpment and self-cost of the processing.

Productivity can be increased, inconvenience can be excluded. Installation of "Impulse" breaker boom system at the reception bunkers of crushing machines will result in real benefit, which can be calculated.

Capacity of the breaker installed to the boom systems is selected and adjusted depending on the dimensions and hardness of the lumps. The process of crushing should take not more than 15 seconds. In this case the lump shold be crushed out into 5-6 parts allowable by size.

Crushing equipment often works with different types of rocks and if lumps with high hardness fall into the machine (like granite, basalt with high compressive strength), the capacity and energy of the breaker is the key parameter. Higher energy provokes higher inner stresses of lumps and results into best efficiency.

Operator of the crushing equipment can manage the breaker boom system in close vicinity to the machine or remotely with special control options.

Model Working pressure, bar The oil flow, l / min Energy consumption, kWh The required voltage, V Dimensions HxWxD, mm

Impulse НА 18A

200/ 320

50/ 24

18

380

1420х1420х900

Impulse HA 22A

200/ 320

60/ 35

22

380

1420х1420х900

Impulse HA 30A

200/ 320

70/ 48

30

380

1670х1420х900

Impulse НА 37А

200/ 320

90/ 68

37

380

1670х1420х900

Impulse НА 45А

200/ 320

120/ 84

45

380

1830x1120x1735

Impulse НА 55А

200/ 320

180/ 94,5

55

380

1830x1120x1735

Impulse НА 75А

200/ 320

220/ 135

75

380

1970x1420x1950

Impulse НА 90А

200/ 320

270/ 160

90

380

1970x1420x1950